Indoor Invinsible Fiber Cable
Product Features
- Adopting bending resistant optical fibers, with low loss, greatly improving the one-time opening rate
- Easy to construct and fast to install
- Achieve non-destructive demolition without affecting the original interior decoration
- The product can be wired using either ambient temperature adhesive bonding or hot melt adhesive bonding
- Applicable temperature -20℃ to 60℃
Technical Parameters
Characteristic | Condition | Data | Unit | ||
Optical characteristics | |||||
Attenuation | 1310nm | ≤0.34 | [dB/km] | ||
1383nm (after hydrogen aging) | ≤0.34 | [dB/km] | |||
1550nm | ≤0.20 | [dB/km] | |||
1625nm | ≤0.24 | [dB/km] | |||
Attenuation changes relative to wavelength | 1285-1330nm, relative to 1310nm | ≤0.03 | [dB/km] | ||
1525-1575nm, relative to 1550nm | ≤0.02 | [dB/km] | |||
Dispersion in the wavelength range | 1285-1340nm | -3.5 to 3.5 | [ps/(nm·km)] | ||
1550nm | ≤18 | [ps/(nm·km)] | |||
1625nm | ≤22 | [ps/(nm·km)] | |||
Zero dispersion wavelength (λ0) | -- | 1300~1324 | [nm] | ||
Zero dispersion slope (S0) | -- | ≤0.092 | [ps/(nm2km)] | ||
Typical value of zero dispersion slope | -- | 0.086 | [ps/(nm2km] | ||
Polarization Mode Dispersion (PMD) | Single fiber (Max) | -- | ≤0.1 | [ps/√km] | |
Fiber optic link value (M=20, Q=0.01%) | -- | ≤0.06 | [ps/√km] | ||
typical value | -- | 0.04 | [ps/√km] | ||
Cable cut-off wavelength (λcc) | -- | ≤1260 | [nm] | ||
Mode Field Diameter (MFD) | 1310nm | 8.7~9.5 | [μm] | ||
1550nm | 9.8~10.8 | [μm] | |||
Effective group refractive index (Neff) | 1310nm | 1.466 | -- | ||
1550nm | 1.467 | -- | |||
Point discontinuity | 1310nm | ≤0.05 | [dB] | ||
1550nm | ≤0.05 | [dB] | |||
Geometric characteristics | |||||
Cladding diameter | -- | 125.0±0.7 | [μm] | ||
Cladding out of roundness | -- | ≤1.0 | [%] | ||
Coating diameter | -- | 235~250 | [μm] | ||
Coating/Cladding Concentricity Error | -- | ≤12.0 | [μm] | ||
Coating out of roundness | -- | ≤6.0 | [%] | ||
Core/cladding concentricity error | -- | ≤0.6 | [μm] | ||
Warpage degree(radius) | -- | ≥4 | [m] | ||
Delivery length | -- | Up to 50.4 | [km/disk] | ||
Environmental Characteristics 1310nm, 1550nm and 1625nm | |||||
Screening tension | -- | ≥9.0 | [N] | ||
-- | ≥1.0 | [%] | |||
-- | ≥100 | [kpsi] | |||
Macro bending additional loss | 100 circles, radius 30mm | 1625nm | ≤0.05 | [dB] | |
100 circles, radius 25mm | 1310nm and 1550nm | ≤0.05 | [dB] | ||
1 circle, radius 16mm | 1550nm | ≤0.05 | [dB] | ||
Coating Peeling Force | typical average value | 1.5 | [N] | ||
Peak value | 1.3~8.9 | [N] | |||
Dynamic fatigue parameters (nd) | -- | ≥20 | -- |
Application
Production Process
Related Video
Further Reading
-
Pre-terminated Cabling Solution for POL Network
This is an introduction of the pre-terminated cabling solution for POL netwroks. Learn about the detailed information of this solution from here.
2023-07-06
-
Basic Principles of Fiber Jumper
This is an introduction of the basic principles of fiber jumper. Learn what is fiber jumper and fiber jumper placement principles in this article.
2023-07-06
-
Fiber Visible Corridor Type Cable Splice Box
This is an introduction of the fiber visible corridor type cable splice box. Learn about how it emerges and what are its features from here.
2023-07-06
FAQ
-
Q: Can we put our brand name (logo) on products?
A:Yes, logo can be printed on both products and packings for bulk orders. -
Q: Can l have a sample?
A:Yes. Please contact us for the products needed. -
Q: What is the sample delivery time?
A:Normally within one week. -
Q: Can you customize the products?
A:Yes, please send us the requirements for evaluation. -
Q: What is the MOQ?
A:It depends. Let us know what products are needed.