SC-APC Plug-In Optical Splitter
Product Features
- Low insertion loss .
- High return loss .
- Wide working wavelength .
- wide operating temperature .
- Good environmental stability .
- Input and output fiber type 2.0, mm or 3.0mm.
Technical Parameters
Specification | 1x2 | 1x4 | 1x8 | 1x16 | 1x32 | 1x64 | 1x128 |
fiber type | G657.A__ | ||||||
Working wavelength | 1260nm~1650nm | ||||||
Maximum insertion loss | ≤3.8 | ≤7.2 | ≤10.5 | ≤13.5 | ≤16.8 | ≤20.5 | ≤23.5 |
Fixed operating wavelength insertion loss uniformity | ≤0.6 | ≤0.7 | ≤1.0 | ≤1.2 | ≤1.5 | ≤2.0 | ≤2.5 |
Loss uniformity across the entire operating bandwidth | ≤1.1 | ≤1.2 | ≤1.5 | ≤1.7 | ≤2 | ≤2.5 | ≤3 |
polarization dependent loss | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.5 |
return loss (output cut-off) | UPC≥50,APC≥55 | ||||||
directionality | ≥55 | ≥55 | ≥55 | ≥55 | ≥55 | ≥55 | ≥55 |
Note1 : The insertion loss of optical splitter without head is reduced by0.2dBon the basis of the above requirements , and the insertion loss of optical splitters with adapters (including rack type, tray type and insert type) is based on the above requirements The upper increase is not more than0.2dB, and the requirements for other indicators are the same; Note2: Insertion loss in the wavelength range of1260~1300, 1600~1650nm, the maximum insertion loss is increased by 0.3dBon the basis of the above requirements ; |
Packing
Product model | Product weight (g) | FCL weight (kg) | Inner box size (mm) | Outer box size (mm) |
1 :4SC-APCInsert TypeOptical Splitter | 125g | 5.2kg | / | 545×445×340 (40pcs) |
Application
Related Video
Related Products
Further Reading
-
Pre-terminated Cabling Solution for POL Network
This is an introduction of the pre-terminated cabling solution for POL netwroks. Learn about the detailed information of this solution from here.
2023-07-06
-
Basic Principles of Fiber Jumper
This is an introduction of the basic principles of fiber jumper. Learn what is fiber jumper and fiber jumper placement principles in this article.
2023-07-06
-
Fiber Visible Corridor Type Cable Splice Box
This is an introduction of the fiber visible corridor type cable splice box. Learn about how it emerges and what are its features from here.
2023-07-06
FAQ
-
Q: Can we put our brand name (logo) on products?
A:Yes, logo can be printed on both products and packings for bulk orders. -
Q: Can l have a sample?
A:Yes. Please contact us for the products needed. -
Q: What is the sample delivery time?
A:Normally within one week. -
Q: Can you customize the products?
A:Yes, please send us the requirements for evaluation. -
Q: What is the MOQ?
A:It depends. Let us know what products are needed.